Home > Event Id > Error 7011 Nlasvc

Error 7011 Nlasvc

Contents

Because you said both problem machines are Terminal servers, maybe you should think about posting to: microsoft.public.windows.terminal_services Are the servers VM's, according to the NIC description VMWare? Was it to install R03 and post-rollup hotfix 018? So my pro tip: Use GPO's or AppSense to map your printers !! The actual error is >>>>>>>> below. http://axishost.net/event-id/error-7011-windows-7.php

XA 6.5 R03 and post hotfix 018 were installed. The >>>>>> timeout occurs once every 8 to 12 hours. My next step is to load wireshark on a few of them and take some captures when it happens again to see if I see anything weird.   Problem started early September The timeout occurs once every 8 to 12 hours. http://discussions.citrix.com/topic/326241-7011-timeouts-from-cryptsvc-and-nlasvc-with-xenapp65-and-windows-server-2008-r2/

Nlasvc Service Timeout

Are the > > latest VMWare tools installed? > > > > Best regards > > > > Meinolf Weber > > Disclaimer: This posting is provided "AS IS" with no The console is also hung. Running MS Forefront Security.  We've messed with removing them and adding to session broker sessions as well - doesn't seem to matter if they are a member or not.  I've got Perhaps that will give you a clue as to what tag/application is your offender.

Operation failed with error 0x00000002 A timeout (30000 milliseconds) was reached while waiting for a transaction response from the (name-of-service) service. Erwin 11/02/2013 at 19:26 (UTC 2) Link to this comment Reply Hi Brian, No we haven't found the combination of drivers which could have caused this problem. We're experiencing 2 or 3 crashes a week, down from 20 (two servers). "Roger" wrote in message news793094A-B82C-4BB8-B[email protected] > Mark, > I have the same problem with Citrix XenApps on Event Id 7011 Windows 2008 R2 Bunch of people have the same issue and there doesn't seem to have a firm solution at this time. 1360-326241-1718639 Back to top Jeroen Baas Members #4 Jeroen Baas 205 posts

The server is >> running all of the latest patches, including SP2. Event Id 7011 Timeout 30000 Milliseconds Waiting These tags are related to McAfee on-access scanning. Do you run TrendMicro >>>>> AntiVirus, read about a problem with that AntiVirus software? >>>>> >>>>> Best regards >>>>> >>>>> Meinolf Weber >>>>> Disclaimer: This posting is provided "AS IS" with With the help of citrix support, they analyzed a memory dump of an affected server for us.

Both crash, but this server has more > >> >> issues than the other. > >> >> > >> >> Microsoft Windows [Version 6.0.6002] > >> >> Copyright (c) 2006 Microsoft Kb2958399 Sure enough, this turned out to be the case. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the AudioEndPointBuilder service. This happens at least once >> a day, sometimes more.

Event Id 7011 Timeout 30000 Milliseconds Waiting

Need Help? http://www.techtalkz.com/windows-help/32275-nlasvc.html The >>>>>>> timeout occurs once every 8 to 12 hours. Nlasvc Service Timeout What's important is once the error >>>>>> occurs, the server must be restarted to resume operation. Event Id 7011 Service Control Manager So you >> >>>>>>> should not disable that service. >> >>>>>>> >> >>>>>>> Is that service started and set to automatic?

We debug our Server 2008 R2 Terminalserver (VM) now for 2 Months to get this problem. check over here Solution Eventually I submitted a case by Microsoft. http://www.blakjak.demon.co.uk/mul_crss.htm > >> Thanks. The console is also hung. Nlasvc Timeout 2008 R2

Because you said both problem machines >> > are >> > Terminal servers, maybe you should think about posting to: >> > microsoft.public.windows.terminal_services >> > >> > Are the servers VM's, Did you also remove all printerdrivers on the RDS server(s)? http://www.blakjak.demon.co.uk/mul_crss.htm >> >>>> When the RDP session starts, the user is prompted for credentials. >> >>>> Once the credentials are entered and user presses enter (or the >> >>>> arrow), the http://axishost.net/event-id/error-7011-windows.php All rights reserved. > C:\Users\administrator.KNOPF>ipconfig /all > > Windows IP Configuration > > Host Name . . . . . . . . . . . . : KAVSAPP01 > Primary

multiple NICs -- Yes - replace cables one at a time until you find the faulty NIC single NIC -- Yes - replace NIC NO - run chkdsk /r to repair Event Id 7011 Umrdpservice On top of the many support related subjects I deal with, cleaning the server room was a day 1 topic. Embarassing!! 1360-326241-1797921 Back to top DOUG STRATTON Members #6 DOUG STRATTON 158 posts Posted 27 February 2014 - 11:02 PM We are having this issue also but more Services crash (dozens).

Same issue. >> >> Mark >> >> "Meinolf Weber [MVP-DS]" wrote in message >> news:[email protected] .com... >> > Hello mark, >> > >> > DNS looks ok for this server.

I am interested in receiving this hotfix, once more publicly avaiable. All rights reserved. The >>>> timeout occurs once every 8 to 12 hours. Kb976674 Did > > you > > get your problem solved? > > > > "Mark" wrote: > > > >> Yes, I have been posting to that Newsgroup as well.

I read a similar post that directs the problem at HP's universal. You saved us. What's important is once the error >>>> occurs, the server must be restarted to resume operation. weblink It has >> happened to all users and appears to the connection independent - RDP >> client version, OS version, do not matter.

We've got 2 RDS servers running Windows Server 2008 R2 with similar issues, we even got some Kernel.Power errors due to all this. Cryptsvc: (Cryptographic Services) Non-system processes like cryptsvc.dll originate from software we installed on our system. Pedro Cabral 23/10/2015 at 12:57 (UTC 2) Link to this comment Reply In our case, the default redirected printer was missing in the user session…any printer was not beeing redirected from We find out that each time the error "A timeout (30000 milliseconds) was reached…" showed up and we are restarting our print spooler immediately the server does respond again and user

Tags: hotfixes, printing, Remote Desktop, Service Control Manager Error 7011, timeout 30000 seconds 19 comments Skip to comment form ↓ Sander 03/09/2012 at 08:46 (UTC 2) Link to this comment Reply The NLASVC errors >> >>>>>> went away, but the "Welcome Screen" hang is still present and the >> >>>>>> server becomes unresponsive and must be rebooted daily. When we configured a scan exclusion for appsense service related folders, the issue was resolved.