Try this: - Please check that you're not already connected to dialup and trying to connect again. - Make sure your computer is using TCP/IP settings to connect. Internet Explorer). Dialup error 604: Wrong information specified. Dialup error 736: The remote computer terminated the control protocol.
Try this: - Make sure your computer is using TCP/IP settings to connect. Dialup error 781: The encryption attempt failed because no valid certificate was found. Dialup error 619: The port is disconnected. Dialup error 629: The port was disconnected by the remote machine. https://sites.google.com/site/vineetssite/networking-guide-domain/dial-up-networking/-error-678---679--error-message-when-you-try-to-connect-to-your-isp
Dialup error 658: The device name in the device .INF or media .INI file is too long. If it doesn't, switch to No Dial Tone troubleshooting. - If you're using a phone service (e.g. You can also try to turn off the power on the ADSL modem for 10min and then to power it up again and check again. Dialup error 611: The router is not available.
Dialup error 603: Caller's buffer is too small. Click Connections. If you are viewing information on devices or services, please note: content reflects instructions for devices and services purchased from AT&T. Error 769 Vpn Dialup error 737: Loopback detected.
Dialup error 646: The account is not permitted to log on at this time of day. Error 769 Broadband Connection Windows Xp Dialup error 672: Cannot read the device name from the media .INI file. Try this: - Please ensure you're dialling the correct dialup number. http://modemsite.com/56k/duns678.asp Dialup error 642: One of your NetBIOS names is already registered on the remote network.
Try this: - Hold down the CTRL, ALT + DELETE keys on your keyboard and open the Task Manager. How To Solve Error 769 Dialup error 648: The password has expired. Join our community for more solutions or to ask questions. Some modems allow you to override DSR and DCD with dip switches and modem commands.
Dialup error 740: The TAPI devices configured for Remote Access failed to initialise or were not installed correctly. http://www.modemhelp.net/dunerror/error_679.shtml Type "tapiini.exe" into the Run text box and then click OK. - Restart your computer. Error 769 In Xp Dialup error 674: Cannot read the maximum connection BPS rate from the media .INI file. Error 769 In Bsnl Broadband Connection Dialup error 734: The PPP link control protocol terminated.
Dialup error 607: The event is invalid. Dialup error 788: The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer. Please ensure that the LAN adaptor is connected before enabling Internet Connection Sharing. These problems sometimes show themselves as the server not resetting the port until the AUTODISCONNECT timer expires. Connecting Through Wan Miniport Pppoe Error 769
Many modems return this error if the remote modem does not pick up the phone. Dialup error 633: The port is already in use or is not configured for remote access dial-out. Dialup error 6: Stack overflow. Dialup error 668: The connection dropped.
Try this: - Open the Start Menu and then open the Control Panel. Error 769 Rds Dialup error 609: The device type does not exist. Rename RASPHONE.PBK to RASPHONE.EXE and then run it.
The line disconnects but the server does not detect it. Dialup error 669: The usage parameter in the media .INI file is invalid. This website is ©1999-Present Bradford Liedel DBA ModemHelp Networks and Web Services. 678 Error Dialup error 632: The structure size is incorrect.
Dialup error 694: ERROR DCB NOT FOUND. If the modem is not wired properly, the DCD or DSR signals may not be received by the server. Dialup error 654: A command or response in the device .INF file section refers to an undefined macro. Try this: - Please ensure you're connecting with the username and password for your dialup service, rather than another iiNet email address.
Dialup error 778: It was not possible to verify the identity of the server. Telkom / Neotell. Dialup error 610: The buffer is invalid. Dialup error 776: The call could not be connected because the destination has invoked the Do Not Disturb feature.
All versions of Windows - This error can occur if: You are dialing the wrong number There is a problem at your ISP or in the telephone network Your modem is Dialup error 752: A syntax error was encountered while processing a script. Check dialing rules >> Area code is correct. 3. Dialup error 71: No more connections allowed.
Try this: - Make sure your computer is using TCP/IP settings to connect. Check the number carefully. Dialup error 712: Biplex port is initialising. Dialup error 20: The system cannot find the device specified.
Try this: - Make sure your dialup settings are set to "Obtain an IP address automatically". - Open the Start Menu and then open the Control Panel. - Select Network and Try this: - The file RASPHONE.EXE may be missing. - There should be a file named RASPHONE.PBK in c:/windows/system32/RAS/. Dialup error 726: The IPX protocol cannot be used for dial-out on more than one port at a time. Dialup error 690: ERROR EMPTY INI FILE.
Try this: - Reset your TCP/IP settings to default. Dialup error 681: General error reported by device.