FTP, WWW, RDP, PCAnywhere, SSL, PPTP, MAIL, > > > etc...all these services are routed to internal servers/workstations. First let me explain the problem. > > > > > > The Problem: > > > > > > It can take up 6 retries for any remote user to All comments welcomed. > > > > > > ~Frank > > > > > > > > > > > > Bill Grant, Aug 27, 2003 #3 Frank Guest You would need to do a lot of tracing and sniffing to see what actually happens. "Frank" <> wrote in message news:eN#... > Thanks Bill, I can assure you it's a
We > > have 32 "static" IP addresses from our ISP. It's the darnedest thing and I hope you >all can help. If you use IP mapping, the client sends the packet to a pool IP which is mapped to the RRAS server's LAN IP. For whatever reason, it struggles to make a successful connection to our RAS servers. directory
Therefore, the only difference is that > I > > > am using a pingable IP address which happens to belong to the router > > instead > > > of Conclusion: I have NO clue as to why I have to use the router's public IP address rather than any of the other 31 public IP addresses our ISP assigned to All comments welcomed. ~Frank Frank, Aug 26, 2003 #1 Advertisements Frank Guest Thanks Bill, I can assure you it's a big relief. current community blog chat Server Fault Meta Server Fault your communities Sign up or log in to customize your list.
If it is a MS router, did you let it autoupdate itself? However, it doesn't like that, I have to use the router's IP (meaning I have to point ras2.mydomain.com to 126.96.36.199 in our DNS servers) and then forward PPTP to the RAS I and my colleagues are totally stumped - we know each end is fine independently, but for some reason they won't work together. Error 721 Vpn Verifying Username And Password If I use > any > > of the other static public IPs, 188.8.131.52 - 184.108.40.206 in a NAT, it > > would take up to 6 retries for the connection
Usually 721 just indicates that GRE is being blocked. Error 619 Vpn In the end I don't know > whether > > it's a router issue (ie, Netopia has problems routing PPTP requests), or a > > protocol issue (PPTP has problems when Frank "Bill Grant" <> wrote in message news:... > Here is what I meant to say. (Always easier after you think about it!) > > Most clients check that they receive http://www.howtonetworking.com/vpnissues/error721.htm The only downside is that one end is a dynamic IP address, so the IPSEC doesn't work, so it's unencrypted now.
I never thought of that possibility. Vpn Error 800 I am not sure if I am clear on this? The type of network they form with their clients is a > > Bridged > > > network. For whatever reason, > > this solved our problem with connecting to the RAS server.
solution Solvedupgraded to samsung 850 pro ssd and recovery partition does not work anymore solution i stream movies from my laptop to my smart tv using HDMI, all of a sudden http://serverfault.com/questions/110009/vpn-returning-721-error-despite-successful-logins-to-from-other-locations Whenever we try to connect it > > > display > > > > the following message: > > > > > > > > Verifying username and password... > > Error 721 Vpn Windows Xp Forum VPN Error 721 Forum VPN Troubles, Error 721 etc Forum SolvedComputer turned off suddenly. Error 678 Vpn We have struggled with this for a year now.
Port 47 (tcp or udp) has nothing to do with VPN. At some point in the past, the remote PCs were successfully logged onto the domain, so now log into that (but obviously can't connect). Or was this exactly what > you had interpreted from my previous posting and I am simply missing what > you're stating? When the server replies, the > packet goes to the NAT router, is modified by NAT and gets the router's > public IP as the sender's IP. Error 718 Vpn
the error says that to solution SolvedLaptop suddenly doesn't work anymore? We don't think that it's authentication; it doesn't seem to get that far. This doesn't explain why I could still somehow log onto the server from work, or why I couldn't log onto the router endpoint at the remote site, but I don't care But you do not need tcp port 47. > > > > > > Best wishes, > > > Bill > > > > > > "Frank" <> wrote in message
Using the router's "real" IP and port forwarding works, because the > client sends the request to the router's IP. Vpn Error 721 The Remote Computer Did Not Respond This is a widely held > > belief (even router manufacturers use it in their documentation), but it > is > > false. From you > original posting, I admit I couldn't see any reason for the problem you were > having. > > Now that I see you resolution, it triggers off some
Can a Bridged network be the reason PPTP struggles when NATed > to > > an > > > assigned IP rather than when using the router's IP? The type of network they form with their clients is a > Bridged > > network. We use a multi-NAT for routing service > > > > request to internal servers. Linksys Vpn Error 721 What kind of problem could cause a whole site to be unable to connect to one VPN (which works from other locations), but be fine with others? –Andrew C Feb 8
I > would expect it to always fail. We no longer have to retry up to 6 times to successfully connect. The Fix: Today, I decided to try something different. One RAS server is configured to use one router as it's > > gateway, and the other RAS server uses the second router as it's gateway. > > When PPTP connections
So for > > example, I might use NAT to redirect WWW which would resolve to > 220.127.116.11 > > to an internal IP on port 80. Log in or Sign up PC Review Home Newsgroups > Windows 2000 > Microsoft Windows 2000 RAS Routing > error: 721 FINALLY RESOLVED! :) Discussion in 'Microsoft Windows 2000 RAS solution LAN suddenly doesnt work anymore Forum SolvedHow excatly does VPN work? If so, I apologize. > > > > ~Frank > > > > "Bill Grant" <> wrote in message > > news:%... > > > Hi, > > > > >
It has > the router's public IP, so it fails. > > 3. So you'd probably remember if you've made an update. share|improve this answer answered Feb 9 '10 at 9:23 Andrew C add a comment| Your Answer draft saved draft discarded Sign up or log in Sign up using Google Sign But it can > > also result from a reply from the server came from a different IP (ie > > different from the IP address the client used to send).
They both have their own > > > separate WAN connection (we use a lot of bandwidth, hence the need for > two > > > WAN connections). The type of network they form with their clients is a Bridged network. By the way, the router's IP is the only pingable public IP, not that that should make any difference at all. Get Error 721> VPN Worked, Suddenly It does not anymore.
I had, as an example, routed ras2.mydomain.com > (18.104.22.168) to some internal IP for PPTP connections only (netopia > routers have PPTP predefined which takes care of TCP port 1723 & Everything works perfectly, > > > EXCEPT PPTP (VPN) connections. When the server replies, the packet goes to the NAT router, is modified by NAT and gets the router's public IP as the sender's IP. Forum Error 721 only on two of fourteen VPN connections.
By the way, the > > router's > > > IP is the only pingable public IP, not that that should make any > > difference > > > at all. So the client is happy. > > 2.